TABLE OF CONTENTS

• Deploy Edge Enterprise Using Jamf

• Configure LibKey Nomad for Deployment

• Deploy Jamf Changes

Deploy Edge Enterprise Using Jamf

First, you must deploy Microsoft Edge Enterprise onto your computers. If you're interested in seeing an example step-by-step approach that Third Iron has taken, click here.

Configure LibKey Nomad for Deployment

Part 1: Log in to your Jamf Dashboard @ YOUR-CLOUD-URL.jamfcloud.com

Part 2: Configure Jamf LibKey Nomad Deployment

1. On the left side of the screen click on "Computers"
2. Under "Content Management" click on "Configuration Profiles"
3. Click on "+ New"
4. Under "General", name the Profile "Microsoft Edge - Deploy Nomad"
5. Click on "Application & Custom Settings" under the "Options" section
6. Then click on "Upload"
7. Click on "+ Add"
8. Under "Preference Domain" type: "com.microsoft.Edge" 
9. Under "Property List" enter the following script:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
     <dict>
          <key>ExtensionInstallForcelist</key>
          <array>
               <string>aegommgkkknipcpebmcbepdapjdojiji</string>
          </array>
     </dict>
</plist>

     10. Click on "Scope"

     12. Click on "Save"

Part 3: Configure LibKeyNomad Preferences

1. Under "Content Management" click on "Configuration Profiles"
2. Click on "+ New"
3. Under "General", name the Profile "Microsoft Edge - Nomad Preferences"
4. Click on "Application & Custom Settings" under the "Options" section
5. Then click on "Upload"
6. Click on "+ Add"
7. Under "Preference Domain" type: "com.microsoft.Edge.extensions.aegommgkkknipcpebmcbepdapjdojiji"
8. Under "Property List" enter the following script:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
	<dict>
		<key>libraryId</key>
		<string>INSERT-LIBRARY-ID-HERE</string>
		<key>buttonPlacement</key>
		<string>bottomLeft</string>
	</dict>
</plist>

      9. Change the value for libraryId from "INSERT-LIBRARY-ID-HERE" to your Library ID (For Example: 1234)

          (Note: This should be a numerical value only)

How to locate your Third Iron Library ID

Via BrowZine: Log in to BrowZine. Your Third Iron ID is the number in your library's BrowZine URL: 
https://browzine.com/libraries/###

Via LibKey.io: Log in to LibKey.io. Your Third Iron ID is the number in your library's LibKey URL: 
https://libkey.io/libraries/###

     10. You may optionally change the value of buttonPlacement from the default of "bottomLeft" to "bottomRight" if you would like to change the position of the LibKey Nomad Button whenever it appears on screen - (Note: This value is case sensitive) 

     11. Click on "Scope"

     12. Set the Scope for the devices that will receive the LibKey Nomad Extension. (Note: This is based on the needs of your organization and will differ for everyone)

     13. Click on "Save"

Deploy Jamf Changes

At this point, based on your Jamf Check-In Frequency settings, devices will now have Edge deployed, LibKey Nomad deployed, and the LibKey Nomad Preference settings deployed. Typical default Jamf Check-In Frequency settings are either 15 minutes, or once per day. Please allow the appropriate time that your organization has set to be able to see the deployments take effect.